technical data sheet adaptor rpc-2.92 plug C mini-smp plug 02S118-S00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface rpc-2.92 according to iec 61169-35 rpc-2.92 mechanically compatible with rpc-3.50 and sma mini-smp according to mil-std-348a, fig. 328 mateable with gppo tm (gilbert engineering co., inc.) and ssmp tm (connectors devices, inc.) documents n/a material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m , over chemical nickel outer contact stainless steel passivated coupling nut rpc-2.92 stainless steel passivated dielectric 1 ps dielectric 2 ptfe gasket rpc-2.92 silicone
technical data sheet adaptor rpc-2.92 plug C mini-smp plug 02S118-S00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 40 ghz return loss 3 30 db, dc to 12 ghz 3 26 db, 12 ghz to 20 ghz 3 18 db, 20 ghz to 40 ghz insertion loss 0.05 x db insulation resistance 3 5 g w center contact resistance rpc-2.92 3.0 m w outer contact resistance rpc-2.92 2.0 m w center contact resistance mini-smp 6.0 m w outer contact resistance mini-smp 2.0 m w test voltage 750 v rms working voltage 250 v rms mechanical data mating cycles rpc-2.92 3 500 mating cycles mini-smp - full detent 3 100 center contact captivation 3 20 n coupling test torque rpc-2.92 1.70 nm recommended torque rpc-2.92 0.80 nm to 1.10 nm engagement force mini-smp - full detent 19 n max. disengagement force mini-smp - full detent 29 n max. environmental data temperature range -40c to +85c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 rohs compliant tooling n/a packing standard 1 pce in box weight 7.6 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 20/12/04 krautenbacher j. 03/07/1 4 c00 12-0205 maik knoll 03/07/14 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recom mendation to infringe existing patents. in the effo rt to improve our products, we reserve the right to make changes judg ed to be necessary.
|
